KTX Series PID Temperature Controller

The KTX series is a 4-digit dual-display PID temperature controller with a large, high-brightness LED display that shows the process value and set value at a glance. The housing is only 50 mm deep, so it fits shallow panels and compact control boxes. Five DIN panel sizes are available — 48×48, 48×96, 96×48, 72×72 and 96×96 mm — with relay output and SSR drive output switchable in one model, switchable thermocouple and RTD inputs, and PID+ control with auto-tuning.

Specifications

Models KTX4 (48 × 48 mm), KTX2 (48 × 96 mm), KTX3 (96 × 48 mm), KTX7 (72 × 72 mm), KTX9 (96 × 96 mm)
Mounting Depth 50 mm (all models)
Supply Voltage 100–240 VAC/DC or 24 VAC/DC (by model code)
Allowable Voltage Range 90% to 110% of rated voltage
Power Consumption ≤ 8 VA
Display Accuracy ±0.5%
Control Modes ON/OFF control, PID control
Sampling Time 100 ms
Input Sensors Thermocouple: K, E, J, N, T, S, R, B; RTD: Pt100, Cu50
Control Output — Relay 3 A, 250 VAC
Control Output — SSR 12 VDC ±2 V, ≤ 20 mA
Alarm Output Relay AL1 / AL2: 3 A, 250 VAC, 1NO; 1 or 2 outputs (by model code); 12 alarm modes; heating / cooling selectable
Relay Life Mechanical ≥ 2,500,000 operations; electrical ≥ 100,000 operations
Dielectric Strength 3000 VAC, 50/60 Hz for 1 minute (between terminals and housing)
Insulation Resistance ≥ 100 MΩ (500 VDC megger)
Vibration Resistance 5–55 Hz, 0.75 mm amplitude, 2 hours in each of the X, Y and Z directions
Noise Immunity Square-wave interference from a noise simulator, pulse width 1 μs, ±2 kV (R phase)
Ambient Temperature Operating: −10 to +50 °C; storage: −20 to +60 °C (no icing or frosting)
Ambient Humidity 35% to 85% RH (no icing or condensation)

For pricing and details, send us an inquiry.

Scroll to Top